Room Condition With A Hospitality Service Admin Set; Hospitality Passwords; Desk Admin Password; Room Condition Password - Nortel Enterprise Edge 2.0 Manual

112 Hospitality Services

Room condition with a Hospitality service admin set

To update or query the Room condition using a HS admin set:
1. Press Ä¡à¡ on a two-line display Enterprise Edge telephone
(M7310 or M7324).
2. If configured, the display shows Password:. Enter the Desk admin password.
3. The display shows Cd of rm#:. Enter the room number and press OK.
4. The display shows rrrrr:Vacant. Press the CHANGE display key and select
the required status for the room set: if the room is occupied, select Srvc done
or Needs srvc; if the room is vacant, select Vacant or Needs srvc. The
default setting is Vacant.
5. To update or query other room sets, press the FIND or NEXT display key and
return to step 3. If there are no more room sets updates or queries, press the
Release button to exit programming.

Hospitality passwords

The Hospitality Services feature allows for two types of passwords to access
different areas of Hospitality programming.

Desk admin password

Use the Desk password to access all Hospitality Services admin features. The
default Desk password is: î¯ê¸ (4677). You need to start a Unified
Manager session to program to change the default Desk password. For more
information about programming using the Unified Manager, see the Enterprise
Edge 2.0 Programming Operations Guide.

Room condition password

The Room condition password controls the ability to change the room condition
with Ä¡àß. The default room condition password is: None.
Different from the Desk password, the room condition password can remain as
None.
You need to start a Unified Manager session to change the default Room condition
password. For more information about programming using the Unified Manager,
see the Enterprise Edge 2.0 Programming Operations Guide.
Enterprise Edge 2.0 Feature Programming Telephone Guide P0911589 Issue 03