One-Line Display; Prime Line; Private Lines; Volume Bar - Nortel Enterprise Edge 2.0 Manual

104 General System features

One-line display

The M7100 telephone has a one-line display. Other Enterprise Edge telephones
have a second line on the display which shows the functions of the three buttons
below it.
Some display buttons, such as
available on a one-line display.
Other display buttons, such as
one-line display telephone, use the following buttons instead of these display
buttons.
Table 2 Substitutes for display buttons
Display button
OK
QUIT
ADD
SHOW
CANCEL
VIEW
OVERRIDE
BKSP
All displays listed in this book are as they appear on the two-line display.

Prime line

You can program your telephone to select an internal or external line or a line pool
automatically when you lift the receiver. This is your prime line.

Private lines

A private line is limited to a selected telephone. Calls put on hold or not answered
on a private line cannot be picked up at any telephone except by the prime
telephone.

Volume bar

The volume bar controls the volume of the receiver, telephone ringer, handsfree
speaker, and headset. Press either end of the volume bar
the volume.

Wall mounting

You can mount Enterprise Edge telephones on a wall. Contact the installer if you
want to have any telephones in your system mounted on a wall.
Enterprise Edge 2.0 Feature Programming Telephone Guide
TRANSFER
OK SHOW
and
Dial pad button
ú or
¨or ®
¥
£
£
£
£
Ãor Ð
ALL
and , are shortcuts which are not
, perform necessary functions. For a
Ã
or to adjust
Ð
P0911589 Issue 03