Programming A Telephone To Log Calls Automatically - Nortel Enterprise Edge 2.0 Manual

ú
3. Press
deletion of your password in the system.

Programming a telephone to log calls automatically

Your installer can program each telephone to automatically log calls coming in on
a line.
Displays
1:Unknown name
1:Unknown number
12:KATE SMITH
NEXT ERASE
12øKATE SMITH
NEXT ERASE
12¤KATE SMITH
NEXT ERASE
49/1234567890123
NEXT ERASE
Call(s) bumped
Hold or release
In use: SETNAME
Jan 4 9:00a 3X
NEXT ERASE
Line061 ø227
NEXT ERASE
Line061 øLogit
NEXT ERASE
Line061
NEXT ERASE
P0911589 Issue 03
OK
or . The display reads
The caller's name is not available.
The caller's number is not available.
_ indicates a new item.
MORE
ø
indicates that the call was answered.
MORE
¤
indicates a long distance call.
MORE
/
indicates that the stored number was trimmed to its
MORE final 11 digits. Press
additional information about the call.
One or more log entries have been deleted by the
Autobumping feature while you are looking at the Call
Log.
Hold or release your active call before entering Call
Log.
The external line is in use.
The repeat call counter, shown with time and date,
MORE
indicates the number of calls you have received from
the same caller.
This call was answered at another telephone (227).
MORE
This call was logged manually.
MORE
This call was not answered.
MORE
Enterprise Edge 2.0 Feature Programming Telephone Guide
Tracking your incoming calls 71
No pswd assigned
, which confirms the
à MORE
or to display