Canceling The Alarm; Turning Off The Alarm; Hospitality Services Admin Alarm Feature - Nortel Enterprise Edge 2.0 Manual

Canceling the alarm

• To cancel the Alarm time on an Enterprise Edge telephone, press
Ä£¡àÞ.
The display shows Alarm OFF.
• To cancel the Alarm time on an analog telephone press
û£¡àÞ.

Turning off the Alarm

When a set rings at the selected time, the person can release the Alarm ring as
follows:
On an Enterprise Edge telephone, press any button except the ú
•
button.
• On an analog telephone lift and replace the handset back into position.
Note: If the user presses the ú button when the set rings, it temporarily
deactivates the Alarm. After a number of minutes, the set will alert again.
If the user is on a call when the alarm sounds they can press any key except
Release to cancel the alarm and maintain their active call.

Hospitality Services admin alarm feature

Only a Hospitality Services (HS) admin set can use the Hospitality Services admin
alarm feature. The Hospitality Services admin alarm feature is room oriented only,
it does not control the alarms on common sets.
The Hospitality Services admin feature can:
• query the current or last alarm time set for a room
• overwrite previous Alarm time programming for a room on the system
- assign an Alarm time for any room on the system
- change an Alarm time for any room on the system
- cancel an Alarm pending for any room on the system
To program the Alarm time for a room with the Hospitality Services admin alarm
feature:
1. Press Ä¡àà on a two-line display Enterprise Edge telephone
(M7310 or M7324).
2. If configured, the display shows Password:. Enter the Desk admin password.
3. The display shows Al of rm#:. Enter the room number.
4. Press VIEW. The display shows Alrm: 07:00am OFF:. If the alarm time is
correct press the ON/OFF display key to activate the alarm.
P0911589 Issue 03 Enterprise Edge 2.0 Feature Programming Telephone Guide
Hospitality Services 109