Using Camp-On - Nortel Enterprise Edge 2.0 Manual

Still in trnsfer
CANCL RETRY
Transfer denied
CANCL RETRY
Transfer to:2___
CANCL RETRY
For other displays, see

Using Camp-on

Ä¡Û
You can transfer an external call to another telephone, when all of its lines are busy.
Ä¡Û
1. Press
2. Dial the number of the telephone to which you want to camp the call.
Camped calls appear on a line button on the receiving telephone, if one is available.
If there is no line button available, you receive a message on the display and hear
Camp tones.
Each Enterprise Edge telephone can handle one camped call at a time.
Displays
221 DND
CALLBACK
Camp denied
Camp to:
CANCL
Camped: 221
CALLBACK
P0911589 Issue 03
Complete the transfer in progress before you access a new
feature, answer another call or select an outgoing line.
Your transfer does not function for one of these reasons:
All the resources needed to perform a transfer are in use.
Try again later.
You have tried to transfer an external call to another
external party. Some restrictions apply.
You cannot transfer your conference call.
RETRY
Press if you entered the wrong internal number or if
the person to who you are transferring the call is not
available.
Common feature displays on page 121.
.
The person to who you redirected a call has Do Not Disturb
active on the telephone. The call has come back to you.
CALLBACK
Press the button or the line button to re-connect
to the call. On the M7100 telephone, just pick up the
receiver.
You have tried to camp an internal call. You can camp
external calls only.
Dial the number of the internal telephone to which the call
is sent.
The telephone to which you camped a call did not answer
the call. The call has come back to you. Press
the line button to re-connect to the call. On the M7100
telephone, just pick up the receiver.
Enterprise Edge 2.0 Feature Programming Telephone Guide
Transferring calls 47
CALLBACK
or