Forwarding your calls
Forwarding your calls to another telephone
ÄÝ
ÄÝ
Press
calls forwarded. You can forward your calls to an internal or external telephone. To
forward your calls to an external destination you must enter the route plus the
dialing digits of the external telephone. For example, if you need to dial 9 for
external calls, then you must enter 9 plus the dialing digits to forward your calls to
an external number.
You can use Line Redirection to forward calls outside the system. Line redirection
takes priority over Call Forward.
Canceling Call Forward
Ä£Ý
Press
Using Call Forward at your telephone
When you use
Forward on busy and Forward no answer programming.
To allow external destination programming you need to start a Unified Manager
session. Program Allow redirect to Yes for each telephone. For more information
about programming using the Unified Manager, see the Enterprise Edge 2.0
Programming Operations Guide.
If the telephone to which you forwarded your calls does not have the same external
lines as your telephone, the forwarded calls appear on intercom buttons.
Forwarded call, do not ring but the line indicator flashes on your telephone. You can
answer the call by pressing the button next to the flashing indicator.
P0911589 Issue 03
and enter the number of the telephone to which you want your
.
ÄÝ
, all calls go to the destination you select, regardless of
Tip
If your Enterprise Edge set is a member of a Hunt Group, Hunt Group routing
for Hunt Group calls overrides the Call Forward all calls setting. For more
information about Hunt Groups see
Tip
If you are one of a group of people who normally forward their calls to one
another, understand the possible limits. To set up forward loops from one
telephone to another in a circle, can cause a telephone to never be answered in
any location.
Enterprise Edge 2.0 Feature Programming Telephone Guide
Hunt Groups
on page 81.
7