Making Calls - Nortel Enterprise Edge 2.0 Manual

Feature programming telephone guide
Hide thumbs Also See for Enterprise Edge 2.0:
Table of Contents

Advertisement

Making calls

There are many ways to make a call, depending on the programming and the type
of call, as follows:
Pick up the receiver and dial. The Enterprise Edge system supports three
methods of dialing. See
Pick up the receiver, press a line button, and dial (if the call is not on your prime
line).
©
Press
Handsfree/Mute
©
Press
the call is not on your prime line).
Press a line button and dial (to talk without the receiver and if Automatic
Handsfree programmed on your telephone).
Use one of the features that make dialing easier. See
calls
on page 37.
Displays
221 busy
PRIORITY
LATER
9__
QUIT
BKSP
95551234
TRANSFER
Already joined
Calling 221
PRIORITY
LATER
Can't ring again
Do not disturb
PRIORITY
LATER
Expensive route
P0911589 Issue 03
Changing how you dial your calls
and dial (to talk without using the receiver). See
on page 26.
, press a line button, and dial (to talk without the receiver and if
The telephone you have called has no internal lines
LATER
available. Press
Message features or press
priority call.
You are dialing using Pre-dial. To erase an incorrect
digit, press the left end of
the number is complete, select a line or lift the receiver.
This prompt remains on your display while you are on
a call you have dialed. To transfer the call, press
TRANSFER
.
Your telephone is connected to the telephone you are
trying to call. Check your active line buttons, and return
to that call.
Wait for the telephone to be answered. If no one
LATER
answers, press
to use the Ring Again (page 36)
or Message (page 61) feature, or press
make a priority call.
You cannot use Ring Again on your current call. You
can use Ring Again while you have a busy signal on an
internal call or line pool request or while an internal call
is ringing.
The telephone you are calling has Do Not Disturb
LATER
turned on. Press
Messages features, or press
priority call.
You have dialed a number, but the least expensive
route programmed for the system is busy. Unless you
release the call, the number goes through on a more
expensive route.
Enterprise Edge 2.0 Feature Programming Telephone Guide
on page 34.
Time savers for making
to use the Ring Again or
PRIORITY
to make a
Ã
BKSP
or
. When
PRIORITY
to
to use the Ring Again or
PRIORITY
to make a
3
Using

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

M7324M7310M7310nM7208M7324n

Table of Contents