Turning Services On And Off Using Feature Codes - Nortel Enterprise Edge 2.0 Manual

90 Using System features
For more information about programming using the Unified Manager, see the
Enterprise Edge 2.0 Programming Operations Guide.
Each schedule can have its configuration of a Service which works separate of
automatic start and stop times. For example, there can be a version of Restriction
service called Night Schedule that prevents people from making long distance calls.
But calling it Night Schedule does not limit the use to that specific schedule. You
can turn the Night Schedule for Restriction Service on or off as needed any time of
the day or night. If you decide to run a service on a schedule, the system uses the
start and stop times used for that schedule.

Turning Services on and off using feature codes

Access to the master control for Services is from the Unified Manager. The
following features codes allow for access and control of the Day-to-day use of
Services.
Ä¡àÚ
Ä£¡àÚ
Ä¡àÛ
Ä£¡àÛ
Ä¡àÜ
Ä£¡àÜ
To turn a Service on:
1. Enter the appropriate feature code from a control telephone.
NEXT
2. Press to move through the schedules until the display shows the version
of the service you want turned on.
OK
3. Press to select the setting, or press
any changes.
To turn a Service off:
1. Enter the appropriate feature code from a control telephone.
Enterprise Edge 2.0 Feature Programming Telephone Guide
Turns on Ringing service. When used at the
direct dial telephone, it activates the alternate
direct dial telephone (extra dial telephone).
Turns off Ringing service.
Turns on Restriction service.
Turns off Restriction service.
Turns on Routing service.
Turns off Routing service.
To activate Normal service and canceling a Service are not the same.
Setting a Service to Normal is not the identical to canceling a Service using
a feature code. If you set the Service to Normal, the normal version of a
Service overrides any automatic schedule and remains until you manually
cancel it. If you cancel the Service, you return to the automatic schedule.
QUIT
to exit the feature without making
P0911589 Issue 03