Copying Programs - Brother KE-430FX Instruction Manual

5-3. Copying programs

To create a program with parameters that are almost exactly the same as those of another program, you can copy the original
program and change just the parts which need to be changed.
Select the program number to be used for creating
1
the new program.
For example, to create
program number 300:
Switch to program copy mode.
2
Select the program containing the original data.
3
For example, to copy
program number 12:
Copy the program.
4
Change the necessary parameters.
5
5. USING THE OPERATION PANEL (BASIC OPERATIONS)
Carry out steps 1 and 2 in "5-2. Program setting method"
to select the program number to be used for creating the
new program.
•
Select a program number from 200 to 999.
2410B
While pressing the F1 key (1), press the F4 key (2).
•
"CoPy" will be displayed in the menu display, "PG"
will be displayed in the SECTION No. display, and the
number of the program containing the original data will
be displayed in the TENSION display.
•
The displays will not appear in this way unless a
program number from 200 to 999 has been selected
as the new program number.
2411B
Press the
the program containing the original data.
•
The value in the TENSION display will flash.
•
If you press the RESET key, you can cancel the copy
operation and return to program mode.
2412B
Press the ENTER key.
•
All parameters in the program will be copied, and the
sewing machine will then return to the status in step 3
of "5-2. Program setting method".
2413B
Carry out the steps from step 4 onward in "5-2. Program
setting method" to change the necessary parameters.
KE-430FX/KE-430FS, BE-438FX
or key (3) to change the number of
2382B 2383B
2414B
40