Speech Testing Setup - Interacoustics Affinity 2.0 Additional Information

2.0
Affinity Additional Information

1.8.2.3 Speech Testing Setup

Startup
1) To enter the Startup options for speech testing, unfold the Speech options and click Startup.
2) Select the default output of Channel 1 and Channel 2 in the two dropdown lists. The selection will
differ depending on which transducers are calibrated.
3) Activate the Talk back by ticking the check box. The talk back level can be adjusted using the slider.
A normal audible level would be approximately 60 dB.
Page 80