Binaural Speech - Interacoustics Affinity 2.0 Additional Information

2.0
Affinity Additional Information

1.4 Binaural speech

It is only possible to test Speech binaurally in the Speech audiometry screen. This can be done if channel 1
and channel 2 are using the same air conduction transducer and only when a different output is chosen. E.g.
right ear in channel 1 and left ear in channel 2 or vice versa.
When the binaural mode is activated
see below:
When the binaural mode is activated
different. This means when this is stored it will store the channel 2 level and display the results as well as
channel 1. See below:
In 'Binaural mode' the Pure Tone Average (PTA) calculations will be calculated monaurally only, although
the value will be displayed above each Audiogram.
in graph mode the stored symbol will be shown as a "B"
in table both results will be stored even if the level is
Page 18