Creating New Protocols; Common Setup - Interacoustics Affinity 2.0 Additional Information

2.0
Affinity Additional Information
In each setup screen you will find three buttons in the lower right corner:
Clicking OK will close the AC440 setup and save all changes.
Clicking Apply will save changes but without closing the AC440 Setup. The change will,
however, immediately be active and visible on the screen behind the setup dialog.
Clicking Cancel will close the AC440 setup without saving any changes made.
1.8.2

Creating new Protocols

1) Click Menu | Setup | AC440 setup to enter the Main setup.
2) Click New to create a new test protocol and fill in the Name field (e.g. "Joan Jones").

1.8.2.1 Common Setup

1) The specifics of the test can be selected starting in the Common screen shown below:
2) Choose in which test the system should begin under Start Screen. Note that MLD is greyed out since
it can only be performed after obtaining the hearing thresholds.
Page 66