Exporting A Test Protocol - Interacoustics Affinity 2.0 Additional Information

2.0
Affinity Additional Information
3.8.7.3

Exporting a Test Protocol

1)
Go to HIT440 setup (Menu/Setup/HIT440 setup)
2)
Click on Export.
3)
Select if the file is to be saved as "Read Only". In this case the test protocol file is locked and the
clinician receiving it will not be able to make changes to it.
4)
Browse for the location on the PC or USB where the test protocol is to be placed.
5)
Click Save. Other HIT440 users will then be able to upload the test protocol using the Import function.
Note: Some available tests are Read Only tests. This means that they can be imported and used, but the
parameters cannot be permanently changed. This is to ensure that specialized tests created by e.g. Hearing
Aid Manufacturers for special application purposes are used as intended for greatly improved test control.
An imported Read Only test protocol will have all its setup points dimmed, as no change of parameters is
allowed in such a test.
Even though Read Only tests cannot be permanently modified at all, you can create another test with
another name based on the Read Only test. You can just select the read only test in Selected Protocol
before selecting New. Then all characteristics of the Read Only test will present for your new test. In this new
test you can modify all parameters – including the Print Wizard.
Page 326
2
4
5