2.0
Affinity
Additional Information
2.4 Launching REM440 with Databases
The REM440 module can be launched and operated under Noah4, Noah3 and OtoAccess™ databases as
described in the following sections. It is also compatible with other patient management systems which have
Noah embedded.
2.4.1
Launching REM440 from Noah4:
1.
Open Noah4 and select the client you want to work with.
Select the Affinity
The Affinity Suite will now open and automatically search for the hardware. If it does not
detect the hardware, a dialog box pops up and asks if you want to run in simulation mode.
Click the REM tab in the upper right hand side of the screen to open the REM440 module.
2.4.2
Launching REM440 from OtoAccess™:
2.0
icon from the menu bar
Page 147