Running Pre-Programmed Test Protocols; Automatic Testing (Auto Run) - Interacoustics Affinity 2.0 Additional Information

2.0
Affinity Additional Information
3.6.4

Running Pre-programmed Test Protocols

1) Place the hearing aid in the test box (as described in section 0)
2) Select the appropriate ear
3) Select a test protocol
Select START to run the test automatically
The Auto Run function will ensures that all test in the protocol are performed automatically. The tests
included automatic test flow will be marked with a
3.6.5

Automatic Testing (Auto Run)

Auto Run ensures that the tests in the test protocol are run as an automatic test flow meaning that all tests
are performed when pressing START. Tests included in the Auto Run is marked with a
ONLY the tests marked with a
need to be activated manually. This is done by clicking on the relevant test, then right clicking and select Run
this test.
.
Auto Run check marks
will be performed when pressing START. To run the remaining tests these
Page 269
in the test screen.