Hls Counselling Setup - Interacoustics Affinity 2.0 Additional Information

2.0
Affinity Additional Information
1.8.2.7 HLS Counselling
Startup
To enter the Startup options for HLS counselling unfold the HLS options and click Startup. Determine the
Talk back level using the check box to set the Talk back default (as described in section 1.7.2.4).
Common
To enter the Common options for HLS counselling unfold the HLS options and click Common.
1) Set the Default input for Channel 1 and the Default Input for Channel 2 using the dropdown lists.
Select if the test should be conducted through Mic1, Mic2, CD1, CD2, or Wave files.
2) Under Default settings it can be decided whether the HLS should be enabled immediately when
opened using the check boxes. If the check boxes are not ticked the HLS will need to be enabled
manually using the Right and Left buttons in the front screen (see section 1.6.8).
3) Select the HLS default headset. If using the Equinox
audiometric headphones or Use HF/HLS sock et if the high frequency headset is preferred.
4) Under Monitor one or both of the channels may be ticked if monitoring is preferred. The level of the
monitoring can be set using the slider.
24
Hearing Loss Simulation (HLS) requires an additional software license.
24
Setup
Channel 1 Channel 2
2.0 2.0
or Affinity hardware choose between Use
Page 94