Working With Individual Setups (Test Protocols); Selecting A Test Protocol - Interacoustics Affinity 2.0 Additional Information

2.0
Affinity Additional Information
2.6

Working with Individual Setups (Test Protocols)

The REM440 module is pre-programmed with standard protocols ready for use which can be selected from
the front screen. However, you may wish to create an individual test protocol accommodating for personal
preferences and test methods.
This section describes both how to select a pre-programmed protocol and how to create an individual test
protocol.
2.6.1

Selecting a Test Protocol

1) Open the REM440 module by selecting the REM tab in the Affinity
2) In the List of Protocols all standard and individual test protocols are listed.
3) When selecting a protocol the tests of the specific protocol will then be listed in the lower left corner
ready for use.
2.0 2.0
/Equinox Suite.
Page 212