The Hit440 Menu Items - Interacoustics Affinity 2.0 Additional Information

2.0
Affinity Additional Information
3.10

The HIT440 Menu Items

The HIT440 Menu gives you access to File, Edit, View, Mode, Setup, and Help.
1) Menu/Print
 Menu/Print/Print will prompt the system to print using the selected print template (see section 4).
 Menu/Print/Print Preview prompts a print preview of the current test protocol using the print
template which is linked to the current protocol. Note that you are prompted to select a template if
the protocol did not include a template (see how to create a print layout in section 0).
 Menu//Print/Print Layout opens the print wizard window from where you can select or create a
template to print the current test protocol (see section for details regarding the Print Wizard).
2) Menu/Edit/Export
 Menu/Edit/Export will prompt the system to export the session as an XML formatted file.
3) Menu/View
 Menu/view/Save window position will save the current position of the HIT440 window on the PC
screen so that it opens at this exact position every time. This is for example practical if you are
usually running and viewing other software modules (such as fitting software) at the same time.
Using this function for moving and/or resizing of the HIT440 will only be necessary once.
4) Menu/Mode
 Menu/Mode/Single measurement will set the system to present the selected stimulus as a single
sweep.
 Menu/Mode/Continuous measurement will set the system to present the selected stimulus
continuously.
 Menu/Mode/Single frequency mode will set the system to perform the a test at a single
frequency.
 Menu/Mode/Endless loop will set the system to perform the tests of the test protocol continuously
until tolerance limits specified in the setup are overstepped.
Menu/Setup
 Menu/Setup/HIT440 setup opens the HIT440 where you can setup customised test protocols (see
section 0 for details)
 Menu/Setup/General setup opens the General setup where settings valid for all tests can be
selected (see section 0 for details).
 Menu/Setup/Temporary setup opens the Temporary setup where temporary settings for the
specific session can be selected (see section 0 for details)
 Menu/Setup/Password protection allows you create or change a password and thereby protect
your HIT440 settings. Press Change password and type in the preferred password. Then press
OK. Note that your password needs to be activated in Protected settings under
Menu/setup/General setup (see section 0).
 Menu Setup/Show/hide protocols prompts a screen allowing you to tick test protocols which are
to be shown in the List of Protocols and untick the test protocols which are to be hidden.
 Menu/Setup/Language opens the language selection. Choose from English, German, Spanish,
French, Italian, Japanese, Portuguese, and Chinese (People's Republic of China). The system
must be restarted in order for a new language selection to take effect.
Page 330