Setup Of Sks10 In The Affinity Test Chamber - Interacoustics Affinity 2.0 Additional Information

2.0
Affinity Additional Information

3.6.3.4 Setup of SKS10 in the Affinity test chamber

Since the SKS10 contains an accelerometer, it needs to be powered by an external power source. Please
ensure that the SKS10 is connected to the power supply and the power supply is connected to a power
source.
1- Connect the skull simulator to the power supply and ensure power supply is connected to a power
source
2- Connect the white plug into the white socket inside the Affinity Test Chamber
Page 267