2.0
Affinity
Additional Information
1.2
Launching AC440 with Databases
1.2.1
Launching from OtoAccess™
Ensure that the Affinity is switched on and connected before opening the software suite. If the hardware is
not detected, a dialog box will appear asking if you want to run the Affinity Suite in Simulation mode, similar
to the following:
To start the Affinity Suite from OtoAccess™:
1. Open OtoAccess™
2. Select the patient you want to work with by clicking on it; it will then highlight blue to indicate
selection.
3. If the patient is not yet listed:
press the New client button
-
fill in at least the mandatory fields, marked with a red asterisk.
-
save the patient details by pressing the Save patient information button.
-
4. Double click on the Affinity Suite in the Select Instrument box.
3
2
For further instructions about working with the database, please see the operation manual for OtoAccess™.
Page 2
4