Curve Display Options; Deleting Curves; Combined Screen View; Changing The Curve Colour - Interacoustics Affinity 2.0 Additional Information

2.0
Affinity Additional Information

2.6.13.1 Curve Display Options

In the curve display options box all curves are listed by input level and colour.
If many of the same curve type (e.g. REIGs) have been measured tick only the ones that you wish to display
on the graph.
Un-ticked curves will be hidden ensuring a less confusing screen view.

2.6.13.2 Deleting Curves

To delete one or all curves right click on the input level marking in the curve display options box. Select
Delete to remove the selected curve or Delete all to remove all curves displayed in the graph.

2.6.13.3 Combined Screen View

If a combined screen is setup you may want to compare to other curves obtained. Press the corresponding
button to toggle between single and combined screen:
In the combined screen setup you can decide exactly which curves are to be compared so that pressing the
combined screen button results in comparing multiple REAR or REIG measures (see section 2.6.3 for how to
do a combined screen setup).

2.6.13.4 Changing the Curve Colour

If having many curves on screen you can change their colours even after they are measured. Right click on
the preferred curve and choose Change curve colour. The system will then allow for choosing a new colour.
Page 174