Rem440; Quick Guide - Interacoustics Affinity 2.0 Additional Information

2.0
Affinity Additional Information

2 REM440

2.1

Quick Guide

1) Open Noah and double click on any client:
2
2) Select the Affinity
3) To view an audiogram, you can select an older audiogram from a previous session or you can
manually enter an audiogram. You can configure your REM module to automatically use the most
recent Audiogram if desired.
NOTE: in order to have targets displayed, there needs to be an audiogram selected.
4) Enter the REM module using the REM tab in the upper right corner of the screen:
5) Select the desired test protocol in the protocol list.
standard test protocols can be found in this dropdown list
6) Perform Tube Calibration
calibration at least once a day.
not the calibration should be performed with the SPL probe.
7) Perform otoscopy and insert the probe tube into the ear.
icon from the menu bar
if this is not already done. It is recommended to perform the tube
If using a regular probe tube, click "NO" when asked whether or
Page 144
Both user-defined and