9 Commissioning the demo project
9.2.4
Monitoring the selectivity module
In the sample project, another process picture is configured for monitoring
selectivity. You can call up the picture by switching to the "SITOP Selectivity" sub-
area.
Figure 9-13
In the process picture, you get the following information:
•
Operating status of the 24 V branches with a module with single-channel alarm
(1)
•
Operating status of the 24 V branches for a module with common alarm (1)
•
Resetting the module after eliminating the faults (3)
Figure 9-14
The block icons of the digital inputs and the operation block for the selectivity
module and the power supply units come from the PCS 7 Advanced Process
Library and are not described in any further detail here.
Integration of a SITOP 24V power supply in PCS 7
Entry ID: 10948108,
V3.2,
2
01/2019
3
1
90