Channel Control Of Your Daw - Solid State Logic Matrix Owner's Manual

Chapter 2 - Getting Started
S S T T E E P P 6 6 : :
In this step we will turn our attention to control of the DAW track.
® Still on the Matrix console, press the
® Press the
Notice that the
selected in the DAW.
® Press the SOLO
® Move the fader at the bottom of the Matrix channel. You will notice that the DAW's
4 5
® Find the SEL KEY
SELECT buttons. These buttons define the function of the lower
which is concerned with DAW control.
Note that the
SEL key.
10 10
14 15
® Ensure that all the
5 5
press them to return to default mode.
0 0
In default mode, the lower
5 5
® Press the SEL key in the channel controlling the
DAW.
10 10
10
® Press the left hand
20 20
5
again. You will notice that this time you have record-armed the
30 30
0
See Chapter 5 for details of other in-channel DAW control functions.
5
40 40
10
50 50
20
30
40
50
Matrix Owner's Manual
22

Channel Control of your DAW

the channel fader. You will notice that the
button will light. Press the
SOLO button in the channel controlling the
notice that the Test track will solo in the DAW. On Matrix, the channel
CUT
buttons in all the other channels will flash.
SOLO LED below the monitoring section is flashing, indicating that there is a solo button
button again to deactivate it.
6 7
area of the centre section, located below the
SEL KEY modes have nothing to do with the upper, analogue
10 10
16
SEL KEY buttons are unlit, indicating that the lower
5 5
0 0
SEL keys function as DAW track selectors:
5 5
10 10
10 10
SEL KEY button marked
20 20
5 5
30 30
0 0
5 5
40 40
10 10
50 50
20 20
30 30
40 40
50 50
CUT button in the channel controlling the
Test track will cut in the DAW. On Matrix, the channel
CUT button again to deactivate it.
8
DAW LAYER
SEL
10 10
MASTER/FOCUS
5 5
0 0
5 5
Test track. You will notice that you have selected the
10 10
0 10
REC ARM and press the
20 20
5 5
Test
30 30
10 0
15 5
40 40
20 10
50 50
30 20
40 30
50 40
60 50
i
n
Mon Me e
Projec t 2 :: T
Test track, located below the
SOLO
Test
track fader is moving.
9
key
10
SEL keys are in default mode. If any buttons are lit,
5
0
5
10
SEL key in the channel controlling the
20
track in the DAW. Leave the track record-readied.
30
40
50
62
Test track, located above
t rs Auto
CUT
itle
CUT button. You will
button will light and the
10 11
10
5
0
5
Test track in the
10
Test track
20
30
40
50
2
TR
12
10
5
0
5
10
20
30
40
50