Osd Menu Overview; Configuration: Using The Osd Submenus - Extron electronics HC 404 User Manual

OSD Menu Overview

In the OSD menu, the IP address and firmware version are displayed in the top border. The
active input settings and output resolution are displayed in the bottom border.
The OSD menu contains eight submenus with various submenu items of adjustable settings
or device information (see the table below). Use the Menu, Enter, and navigation buttons
to navigate the menu.
Submenus
Quick Setup
Picture
Controls
Input
Output
Audio
Advanced
Communication
Device Info
(Read Only)
NOTE: The Communication submenu is normally locked. Press and hold the Enter
button for 10 seconds to unlock the submenu items.

Configuration: Using the OSD Submenus

The AV, scaling, and basic IP settings for the system can be configured by using the on-
screen display menu system. AV and scaling settings can also be configured via a host
connection through the LAN port or the USB port using PCS software.
Use the information in this section as a guide to available settings as you configure the AV
settings using the OSD and front panel buttons. For instructions on how to access and
navigate through the OSD menu, see
Input Input EDID Output
Format Resolution
Image Image Size
Position
Input Horizontal/ Total Pixels/
Format Vertical Start Phase
Resolution HDMI Format HDCP
Notification
Audio Mute Audio Format Program
Volume
Test Pattern Screen Aspect Ratio
Saver/
Timeout
MAC DHCP IP Address
Address
Unit Name Firmware Temperature
Version
OSD Menu Navigation
Submenu Items
Audio Mute Test
Pattern
HDCP Input
Authorization EDID
Output
Format
Auto Switch Factory
Reset
Subnet Mask Gateway
Active Input Output
Details Details
on page 28.
HC 404 System • Operation
DHCP IP
Mode Address
Detected
Display
30