Table of Contents
Advertisement
Device Info submenu
Figure 21.
The Device Info submenu displays device information including unit name, firmware
version, internal temperature, input and output signal information, and detected display
information. This submenu is read-only and does not contain any adjustable submenu items.
Resetting the Unit Manually or Via Software
A total of seven reset modes are available for the HC 404 system. See the
table
•
•
•
ATTENTION:
Quick Setup
Quick Setup
Unit Name: HCR-102-00-03-24
Firmware: 1.00.0001
Temp:
Picture Controls
Picture Controls
Input 1: DVI 1080p
Input
Input
*67.49kHz 59.99Hz
*Total Lines: 1125
Output
Output
Output: 1080p @60Hz
Audio
Audio
*Format: HDMI RGB 444 Full
Advanced
Advanced
Detected Display
*1920x1080 @60Hz (SAM)
Communications
Communications
Device Info
Device Info
Device Info
Device Info Submenu
starting on the next page for a summary of all of the modes.
Five reset modes are available by pressing the Reset button on the front panel
of the HCR 102. The Reset button is recessed, so use a pointed stylus,
ballpoint pen, or Extron Tweeker to access it.
Three reset modes (Reset Device Settings, Reset Device Settings and Delete Files,
Reset All Settings and Delete Files) are available using PCS software, accessible by
selecting Reset Device from the device menu, selecting the radio button for the
desired reset mode, and clicking Reset.
Some of the reset modes are accessible using Toolbelt software, and one is also
available using the OSD menu and front panel buttons.
•
Review the reset modes carefully. Using the wrong reset mode may result in
unintended loss of flash memory programming, port reassignment, or a unit reboot.
•
Étudier de près les différents modes de réinitialisation. Appliquer le mauvais mode
de réinitialisation peut causer une perte inattendue de la programmation de la
mémoire flash, une reconfiguration des ports ou une réinitialisation de l'unité.
122.0F 50.0C
HC 404 System • Operation
reset modes
R
41
Advertisement
Table of Contents
Troubleshooting
