Extron electronics HC 404 User Manual page 39

Quick Setup submenu
Quick Setup
Picture Controls Picture Controls
Input Input
Output Output
Audio Audio
Advanced Advanced
Communications Communications
Device Info Device Info
Figure 14. Quick Setup Submenu
The Quick Setup submenu provides quick access to common input, output, and
communication settings. This submenu contains the following submenu items:
• Input Format — Press the navigation buttons to select the desired video input format
(see Input Format on page 33). The current input is displayed in the title of the
submenu.
NOTE: Input 2 (RGB) is read-only.
• Input EDID — Press the navigation buttons to select a discrete EDID or match the
output resolution (see EDID
the submenu.
Output Resolution — Press the navigation buttons to select from a list of output
•
resolutions and refresh rates (see
1080p @ 60 Hz.
• Audio Mute — Press the navigation buttons to globally mute or unmute the audio.
• Test Pattern — Press the navigation buttons to select an available test pattern to
display or to turn a test pattern off (see
test patterns are Crop, Alternating Pixels, Color Bars, Grayscale, Blue
Mode, and Audio Test Pattern (pink noise). The default setting is Off.
DHCP Mode — Press the navigation buttons to enable or disable DHCP mode.
•
• IP Address — Press the left and right buttons to change octets. Press the up and
down buttons to change the value of a selected octet.
on page 33). The current input is displayed in the title of
Resolution on page 35). The default setting is
Test Pattern on page 38). The available
HC 404 System • Operation 31