Extron electronics HC 404 User Manual page 48

Communication submenu
Quick Setup Quick Setup
Picture Controls Picture Controls
Input Input
Output Output
Audio Audio
Advanced Advanced
Communications
Communications
Device Info Device Info
Figure 20. Communication Submenu
The Communication submenu displays the device MAC address, DHCP status, the
current IP address and subnet mask, and the gateway IP address.
NOTE: Press and hold the Enter button for 10 seconds to edit settings in the
Communication submenu.
• MAC Address — Displays the MAC address of the device (read only).
• DHCP Mode — Press the navigation buttons to turn the DHCP mode on or off. The
default is Off. If you turn DHCP on, the IP address of the unit will use an IP address
that is dynamically assigned by a DHCP network server instead of a fixed address..
• IP Address — Press the left  and right  buttons to select an octet of the IP
address. Press the Up and Down buttons to adjust the value of the selected octet. The
default is 192.168.254.250.
Subnet Mask — Press the Left and Right buttons to select an octet of the subnet
•
mask address. Press the up  and down  buttons to adjust the value of the selected
octet. The default is 255.255.255.0.
• Gateway — Press the left  and right  buttons to select an octet of the gateway
address. Press the up  and down  buttons to adjust the value of the selected octet.
The default is 0.0.0.0.
MAC Address
00 : 05 : A6 : 00 : 03 : 24
DHCP Mode
Off
IP Address
192 . 168 . 254 . 250
Subnet Mask
255 . 255 . 255 . 0
Gateway
0 . 0 . 0 . 0
HC 404 System • Operation 40