Table of Contents
Advertisement
Step 6 — Configure AV Settings
The AV and scaling settings for the system can be configured via a host connection through
the LAN port or the USB port using Extron Product Configuration Software (PCS). You can
also configure the scaler settings in the receiver using the on-screen display (OSD) menu
system. See
AV Configuration Using PCS Software
Step 7 — Configure the Control Settings
To use the COM, IR, or digital I/O ports on the receiver, you must configure them. HC 404
systems come with a basic configuration already installed, but you can modify the
configuration if needed.
CEC control of the output device can be customized during configuration with Global
Configurator.
The basic steps are outlined below in the recommended order.
NOTES:
•
See the Toolbelt Help file and Global Configurator Help file, and GUI Designer Help
file as needed for step-by-step instructions and detailed information. The help file
for GC includes an introduction to the software and how to start a project and
configuration.
•
You must successfully complete Extron Control Professional Certification training
to obtain GC Professional.
1.
Using GC, create a new GC Pro or GC Plus project and configure the receiver and other
IP Link Pro devices. The configuration tells the receiver:
•
how its control ports function
•
how to control other products
•
which touchpanels to interact with
•
what to monitor
a.
Configure the control ports on the receiver.
•
•
•
b.
Set up monitors, schedules, macros, and local variables.
c.
Add any optional touchpanels and set them up:
•
•
2.
Save and build the project.
3.
Upload the system configuration to the HCR 102 receiver.
Step 8 — Test and Troubleshoot
…
Test the system. See the
of items to check during system troubleshooting.
…
Make adjustments to wiring or configuration as needed.
Using the OSD Menu System
Select device drivers and link them to each serial, IR, or Ethernet port.
Select settings (serial protocol or digital I/O settings) as needed.
Configure CEC controls, if desired.
Create the GUI configuration for the touchpanels and add it to the project.
Configure functions, monitors, or schedules for the touchpanels and their
buttons.
Troubleshooting
HC 404 System • Hardware Features and Installation
on page 28 and
starting on page 48 for instructions.
•
when to do things
•
whom to notify, how, and under what
circumstances
section starting on page 58 for an outline
7
Advertisement
Table of Contents
Troubleshooting
