Extron electronics HC 404 User Manual page 26

Transmitter and receiver collaboration system
Hide thumbs Also See for HC 404:
Table of Contents

Advertisement

LAN
LAN (IP) connector and LEDs — To connect the HCR 102 to an Ethernet network
N
(so you can configure and control the HCR 102 and the devices connected to it, and
for touchpanel control), plug a cable into the LAN RJ-45 socket (see
connect the other end of the cable to a network switch, hub, router, or PC connected
to a LAN or the Internet. For details of communication protocols, ports, and services
used, see the Pro Series Control Product Network Ports and Licenses Guide at
www.extron.com.
Cabling:
For 10Base-T (10 Mbps) networks, use a CAT 3 or better cable.
For 100Base-T (max. 155 Mbps) networks, use a CAT 5 or better cable.
You must configure this port before using it. Configure the settings via PCS, Toolbelt or
Global Configurator. See the help files for each software package for basic information
on configuration.
Activity LED — This yellow LED blinks to indicate
network activity.
Link LED — This green LED lights to indicate a
good network connection.
Ethernet
Insert Twisted
Pair Wires
RJ-45
Connector
Pins:
8
7
6
5
4
3
2
1
Activity
Link
LED
LED
2 2
2
LAN
-XX-XX-XX
-XX-XX-XX
X
E######
E######
#
LAN
HCR 102 Rear Panel
Figure 8.
LAN Connector and LEDs
MAC address (see
figure
O
user hardware ID number (Media Access Control [MAC]
address) of the unit (for example, 00-05-A6-05-1C-A0).
You may need this address during device discovery and
configuration.
PC
TCP/IP
Network
AV Device
LAN (Ethernet)
Default protocol:
• IP address: 192.168.254.250
• Gateway IP address: 0.0.0.0
• Subnet mask: 255.255.255.0
• DNS address: 127.0.0.1
• DHCP: off
• Link speed and duplex level:
autodetected
• Data rates: 10/100Base-T
Default login credentials:
• Username: admin
• Password: extron
3,
) — This is the unique
O
HC 404 System • Hardware Features and Installation
figure
3,
) and
N
NOTE: Initial units ship
with the functions of
these LEDs reversed.
Subsequent units will
ship with the LED
functions as noted at left.
MAC
Address
00-05-A6-XX-XX-XX
MAC: 00-05-A6-XX-XX-XX
S/N: ####### E######
18

Advertisement

Table of Contents
loading

Table of Contents