Preparation; Preparation; Component Identifi Cation - Honda HRM3000 Owner's Manual

Component identification
3

PREPARATION

Component identifi cation
Body
Top view
Control panel
Docking station
Supplied items
AC adapter
Install the AC adapter off the ground.
After making all other connections,
connect the AC adapter to the power
outlet (House).
10
* Purchase boundary wire and wire pegs at your dealer.
Manual STOP button
When you press the
manual STOP button,
the control panel cover
pops up.
LED indicator
Charging plug
Screw
Quantity: 7
Extension cord
If the power cord of the AC adapter
is not long enough, you can extend
it with the extension cord.
Length: 10 m
Bottom view
Rear (drive) wheels (2)
The lawnmower recharges at the docking
station, and returns to the docking station
when mowing is fi nished or the battery's
charge becomes low.
You can check the status of the boundary
wire with the LED indicator (M page 64).
The supplied blade holder can be stored in the
docking station.
The storage location is under the station cover.
Blade Holder
Use the blade holder
when replacing the blades
(M page 83).
Charging socket
Front (caster)
wheels (2)
Blade disc
Blades (3)
Carrying area