Manual Mode - Honda HRM3000 Owner's Manual

Manual mode

With this function, you can confi gure the lawnmower to mow without the work
timer function.
NOTE:
- If you want to operate the lawnmower with [Manual mode], see "Operating the lawnmower with the
Manual mode" (M page 89)
Mowing pattern
You can select from 3 mowing patterns below:
[Random]
With the [Random] setting, when the
lawnmower detects the boundary wire,
it turns at a wide angle. This is the most
effective for mowing a large open area of
grass. For normal operation, use this setting.
[Mixed]
With the [Mixed] setting, the lawnmower alternates
between the [Random] mowing pattern and the
[Directional] mowing pattern at regular intervals.
Wire overlap
When the lawnmower detects the boundary wire, it can slightly cross the boundary to mow the outer edges
of the mowing area.
Wire overlap
Edge cutting:
With this function, you can mow the unmown area along the boundary wire.
[Directional]
With the [Directional] setting, when
the lawnmower detects the boundary
wire, it turns at a narrow angle. This is
used for mowing narrow areas.
Boundary wire
Setting the lawnmower operation
If the edge cutting setting is
enabled, the lawnmower goes
around your garden along
the boundary wire to mow the
edge before starting the usual
mowing.
43