Reset; Help - Honda HRM3000 Owner's Manual

Setting the system

Reset

You can reset all settings to the factory defaults.
Home screen
[1.Factory reset]
Execute this command to revert all settings to their
factory defaults.
NOTE:
- This command will not reset the history of the
lawnmower (working and fault history). This only
resets the settings of the lawnmower.
- Consult your dealer before executing this
command.
- Dealer settings will be lost after this command.
Home screen
[2.Restore dealer settings]
Reset to the settings confi gured by the dealer.
NOTE:
- This command will not reset the history of the
lawnmower (working and fault history). This only
resets the settings of the lawnmower.
- Consult your dealer before executing this
command.

Help

You can get the information of the lawnmower such as the model name, frame
serial number, and software version.
Menu screen
Press and hold number button "0"
This is the software version.
58
Menu screen
[5.System settings]
J
Menu screen
[5.System settings]
J
11 :0 4 Wed 24 / F EB
H elp
H on d a P o wer E q u ipm ent
M iimo : HRM 30 0 0
:MB E F -10 00 00 1
So f twa re v e rs io n
Ma in E CU
Dis p la y E CU
[5.Reset]
J J
Input your PIN and press the H button.
1
Select [Yes].
2
Press the H button.
3
After the message "Activated" is displayed,
the power turns off.
[5.Reset]
J J
Select [Yes].
1
Press the H button.
2
After the message "Finished" is displayed.
This is the model name.
This is the frame serial number.
NOTE:
: 1. 0. 0
- If the Frame number is
: 1 . 0. 0
"0000000", contact your
dealer.