Honda HRM3000 Owner's Manual page 21

Confi guring the settings through the setup wizard
This section explains the setup wizard procedure using the control panel on the lawnmower.
The setup wizard will guide you to confi gure the settings for your mowing operation as follows:
Menu name
[1. Cutting height] For setting the height of the
lawnmower blades.
[2.Garden layout] For confi guring the settings related to
the layout of the boundary wire. These
setting values are referred from the
other settings.
[3.Mowing start For confi guring the mowing start point
points] settings to enable the lawnmower to
start mowing from other areas than
from docking station.
[4.Test start points] For testing the start points confi gured
in [3.Mowing start points] menu.
[5.Work timer] For setting the work timer to operate
the lawnmower according to the
schedule.
NOTE:
- Before starting the setup wizard, confi rm the completion of installing the docking station and laying
boundary wire with your dealer.
- Before starting the setup wizard, fi ll out the DEALER CHECKSHEET at the end of the Owner's Manual.
- If the DEALER CHECKSHEET at the end of Owner's Manual was already fi lled out by your dealer, refer
to it when confi guring the settings through the setup wizard.
- After the settings are fi nished through the setup wizard, you can modify the setting values in the menu
settings. For details, see "4. MENU SETTINGS" (M page 30).
- You can also modify the setting values in Mii-monitor.
Usage
- Blade height
- Direction for the lawnmower to dock to
- Length of the boundary wire
- Garden size
- Existence of narrow passages
- Direction of the mowing start points
- Distance of the start points from the
- Ratio with which the lawnmower
- Testing the setting of each start point
- Work day and work time
- Seasonal work time
Setting up the lawnmower
Confi guring and testing the
settings
the docking station
docking station
operates in each area
19