Honda HRM3000 Owner's Manual page 74

Robotic lawnmower
Hide thumbs Also See for HRM3000:
Table of Contents

Advertisement

Messages
Message
No boundary
signal
Obstruction
detection
Obstruction
sensor
Outside loop
Upside down
Contact your dealer if the following messages have appeared.
Area sensor
Battery Error
Battery temperature
Blade motor
Blade motor blocked
Blade motor relay
Bluetooth communication error
Charging control
It may be necessary to exchange the battery. Contact your dealer with the operating history ready (cutting
time, charging time, returning time).
72
Cause
The lawnmower does not detect the
boundary wire signal.
An obstruction is being detected.
Obstruction sensor is inactive, or there
is an object interrupting the sensor.
The lawnmower exited the boundary
wire.
The lawnmower is upside down.
Clock
Communication Error
Data memory Error
Display Unit Error
Lift sensor
Manual stop
Motor ECU Error
Motor sensor Blade
Solution
Check if the boundary wire connectors are
correctly connected.
Check a power supply of docking station. See
"Test start points" (M page 50). If the message
does not disappear, contact your dealer.
Enter the PIN so that the message disappears.
If the message does not disappear, contact your
dealer.
Fully move the main cover in order to check
sensors can be activated.
Shake : Not possible to recover
Turn off : Not possible to recover
If "Obstruction sensor" message remains, check
around and underneath the cover for any objects
like chips, dust or small toys, then remove it, or
contact your dealer.
Move the lawnmower into the work area.
Check the power supply of the docking station.
Check if the boundary wire connectors are
correctly connected.
If the message does not disappear, check if
the boundary wire connectors are correctly
connected, and check if there are no similar
lawnmowers in the area or any electronic device
or electrical installation that could interfere with
the lawnmower signal.
If the message still does not disappear, contact
your dealer.
Place the lawnmower on a fl at surface, and enter
the PIN so that the message disappears. If the
message does not disappear, contact your dealer.
Motor sensor L
Motor sensor R
Rollover sensor
Tilt sensor
Wheel motor
Wheel motor blocked
Yaw sensor

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents