Checking The Lawnmower; Turning On / Off The Power; Operation - Honda HRM3000 Owner's Manual

Connecting to a power source / Checking the lawnmower / Turning on / off the power
Attach the station cover to the docking station.
3
CAUTION:
Do not secure the power cord with the pegs used to secure
the boundary wire. Doing so may damage the power cord.
Connect the AC adapter plug to a power outlet with the designated voltage.
4
Power outlet voltage for the E and S types: AC 230 V
Power outlet voltage for the B type: AC 240 V

Checking the lawnmower

Before operation, check to make sure that it is connected all the way into the docking station.
CAUTION:
- Do not touch the recharging connector. If you touch it, you may become injured.

Turning on / off the power

Turning on the power
After the battery is charged, press the A (On) button to turn on the lawnmower.
The A (On) button is located on the control panel at the rear side of the lawnmower.
N WARNING
- When stopping the lawnmower, approach it from the back. Approaching it from the front or
sides may lead to unintended contact with the lawnmower, and you may fall over it when the
lawnmower begins to move.
Press the manual STOP button.
1
The control panel cover pops up.
64
The light above the charging plug changes as follows:
Color
Green The docking station signal setting is correct.
Green The boundary wire is too long.
(blinking)
Amber The lawnmower is correctly connected to
the docking station.
Amber A signal problem—such as the boundary
(blinking) wire becoming disconnected or cut—has
occurred. Contact your dealer.
Red A station signal problem—such as the
(blinking) station wire becoming disconnected or
cut—has occurred. Contact your dealer.
Red The docking station is fault. Check the
connectors (M page 79). Contact your
dealer.
Off Confi rm the connection with the power cord.
If the docking station is correctly
connected with the power cord, a power
failure has occurred. Contact your dealer.
Description