Honda HRM3000 Owner's Manual page 41

Home screen
[2.Mowing pattern]
You can select from 3 mowing patterns below:
[Random]
With the [Random] setting, when the
lawnmower detects the boundary wire,
it turns at a wide angle. This is the most
effective for mowing a large open area of
grass. For normal operation, use this setting.
[Mixed]
With the [Mixed] setting, the lawnmower alternates
between the [Random] mowing pattern and the
[Directional] mowing pattern at regular intervals.
You can adjust how the lawnmower moves while
mowing.
With the [Mixed] setting, the lawnmower alternates
between random mowing and directional mowing in
approximately 15-minute intervals.
Home screen
[3.Wire overlap]
When the lawnmower detects the boundary wire,
it can slightly cross the boundary to mow the outer
edges of the mowing area. You can adjust how far it
crosses the boundary wire.
Menu screen
[2.Garden setup]
J
[1.Point 1] to [5.Point 5]
J
Menu screen
[2.Garden setup]
J
Setting the lawnmower operation
[1.Auto mode]
J
[Directional]
With the [Directional] setting, when
the lawnmower detects the boundary
wire, it turns at a narrow angle. This is
used for mowing narrow areas.
Select [Random], [Directional] or [Mixed].
1
Press the H button.
2
Press the G button to return to the
3
previous screen.
[1.Auto mode]
J
Wire overlap: From boundary wire to front of the
lawnmower.
Enter a value from 20 to 45 (cm).
1
Press the H button.
2
J
J
39