Honda HRM3000 Owner's Manual page 39

Distance from the boundary wire when the lawnmower goes toward
the mowing start points:
The lawnmower moves between the boundary wire and the specifi ed value at random as it goes toward
the mowing start point.
Low value
High value
Passage width sample table
Setup level Passage width
0 10 cm
1 25 cm
2 30 cm
3 35 cm
4 40 cm
5 50 cm
6 60 cm
7 70 cm
8 80 cm
9 90 cm
10 100 cm
11 110 cm
12 120 cm
13 130 cm
14 140 cm
15 150 cm
The angle at which the lawnmower deviates from the boundary wire:
The lawnmower travels to this location along the boundary wire, and then turns away from the boundary
wire to start mowing.
You can confi gure the angle (range) at which the lawnmower deviates from the boundary wire when it
starts mowing as below (Default value is from 10° to 170°):
Range
TIPS Use the exit angle to let the lawnmower reach the mowing areas directly instead of using long
wire exit locations.
Passage width: From boundary wire
to middle of the lawnmower
NOTE:
- The fi eld strength varies depending on the length of the
boundary wire. The fi eld becomes weaker with a longer
boundary wire, and stronger with a shorter boundary wire.
- When the value is high (by avoiding moving along the same
path), you can avoid creating wheel tracks in the grass.
- The numerical values of this table are for reference to return
the lawnmower to the docking station along a straight line.
- The numerical values may differ depending on the actual
conditions.
Line
Start
End
Setting the lawnmower operation
Narrow passage
Low value
Value is too high
NOTE:
- When the value is too high, lawnmower
may not pass through narrow passage.
Boundary wire
37