2.7 Mounting and Location
NOTE: Magnetic fields can damage hard drives and medical devices.
The PEL should be placed in a well-ventilated room; temperature not to exceed
those specified in § 5.5.
The PEL 102 and PEL 103 can be mounted to a flat ferromagnetic vertical surface
using the molded-in magnets.
They can also be mounted to a flat vertical surface using the MultiFix multi-purpose
mounting accessory.
The MultiFix is equipped with a powerful magnet for ferromagnetic surfaces and a
double joint articulated hinge for "door-top" mounting (hangs from the top of the
doors) or for handing on hooks.
2.8 theft security
The PEL is equipped with a Kensington Security Slot (see #7 Figure 1) for use with a locking cable to protect your
instrument from theft (locking cables available from third parties such as office or PC supply stores).
2.9 button functions
BUTTON
DESCRIPTION
ON/OFF Button:
-
Turns the instrument ON or OFF (see § 3.1).
NOTE: The instrument cannot be turned OFF while connected to an AC outlet or if a recording is in progress.
CONTROL Button:
-
Starts/Stops the recording session and Enables/Disables Bluetooth (see § 3.4).
ENTER Button (PEL103):
-
Displays partial energies (long push) (see § 3.7.2)
NAVIGATION Button (PEL103):
-
Enables browsing and the selection of data displayed on the LCD (see § 3.7).
Power & Energy Logger Model PEL 102 and PEL 103
Find Quality Products Online at:
Table 1
GlobalTestSupply
www.
Figure 6
.com
sales@GlobalTestSupply.com
11