Cook Tab; Cooktime Display; Temperature Display - Broaster 1600 Operation Manual

COOK TAB

Cook Filter
Auto Comp ON
05:00
Select Preset
01
Cycles Since Last Filtered
This tab is the main working screen. From
this screen you can set the Cook Cycle
Time, Cook Temperature, or select a Prod-
uct Preset.

CookTime Display:

The cook time is indicated in the box next
to the clock face. To change the time press
the time display twice and a keypad will
appear.
Enter the cook time for the product you are
cooking, as you enter the time it will appear
above the keypad. To save this time press
the enter key the new time will be entered
and the keypad will disappear.
If no entry is made or the enter key is not
pressed with in 25 seconds, no change is
made to the time.
When a cooking cycle is started the box
below the cook time turns yellow and
shows the amount of time remaining in the
cycle. The right box displays "CUSTOM".
The word "CUSTOM" also replaces the
tabs across the top of the display. "CUS-
TOM" indicates you are in manual cooking
mode.
Setup Help
Set Heat ON
360F
Select Preset
Auto Comp ON
05:00
broaster.com Manual #17269 8/13 Rev 5/14
At the end of the cycle the left box alter-
nates between red and white, the alert
sounds and continues until the exhaust
valve is opened by turning the small handle
on the countertop from "CLOSED" to
"OPEN".
Auto Comp
In the upper right corner of the cook time
display is the Auto Comp indicator. It will be
black if Auto Comp is off and green if Auto-
Comp is on.
To turn Auto Comp on or off press the cook
time display twice. When the keypad
appears the Auto Comp toggle switch is in
the upper right corner of the keypad. If the
button is red Auto Comp is off, if it is green
Auto Comp is on. Press the Auto Comp
button to change it then press the enter key.
Our recommendation is that Auto Comp
should be on when cooking a load of prod-
uct.

Temperature Display:

Set
The temperature is indicated next to the
thermometer.
When the fryer is turned on in the morning
this box will be yellow and "Heat On" will be
displayed. The temperature will alternate
between "LOW" and the set temperature
until the oil temperature reaches the set
temperature.
There are other times when this will occur;
1. Anytime the temperature is changed.
2. After a filtering cycle.
3. When a preset is selected and the oil
temperature is not at the preset tempera-
ture.
6-2
Heat ON
360F