Choose Preset Cook Cycle; Change Cook Time; Change Cook Temperature; Activate/Deactivate Auto Comp - Broaster 2400XP Operation Manual

Preset Cook Mode

Choose Preset Cook Cycle:

Action: Press a button, 0 thru 9, corre-
sponding to the desired preset.
Response: The TIME display shows
"P__X", where X is the preset selected.
If a button is not pressed
in 10 seconds, the display
reverts to the previous display.
Action: Press the same button again,
Response: The TIME display shows
the preset time, the AUTO COMP LED
turns on if enabled, the TEMP display
shows the preset setpoint, and the
temperature will regulate to the new
setpoint.
PROGRAMMING PROCEDURE (PRESET
MODE)
Action: Press and hold the TIME and
TEMP buttons simultaneously for
3 seconds.
Response: The TIME display and
TEMP display begin flashing. The
CYCLE COUNT display show "-0"
indicating that the preset #0 values are
displayed. The preset values for the
TIME, TEMP, and AUTO COMP will be
shown on the display.

Change Cook Time:

Action: Press the TIME button once.
Response: The TEMP display turns off
and the TIME display flashes.
reverts back to both the TIME and TEMP
displays flashing.

Change Cook Temperature

reverts back to both the TIME and TEMP
displays flashing.

Activate/Deactivate Auto Comp

Advance to Next Preset

Repeat the process as described. After the
presets for #9 are displayed, pressing the
RESET button again causes the control to
return to normal operation.
6–3
broaster.com Manual #16285 8/05 Rev: 2/14
Action: Enter the desired cook time
and press the TIME button to save the
new setting.
If a button is not pressed
in 10 seconds, the display
Action: Press the TEMP button once.
Response: The TIME display turns off
and the TEMP display flashes.
Action: Enter the desired temperature
setting and press the TEMP button to
save the new setting.
If a button is not pressed
in 10 seconds, the display
Action: Press and hold the AUTO
COMP button for 3 seconds.
Response: AUTO COMP is enabled
when the AUTO COMP LED is on and
disabled when it is off.
Action: Press the RESET button once.
Response: The CYCLE COUNT dis-
play changes to "-1" and the presets
for #1 are displayed.