Load Menu; Shortening Management; Language Selection; Alert Settings - Broaster 1600 Operation Manual

LOAD MENU:

Menu changes that have been downloaded
to a flash drive can be loaded onto fryer.
Plug the flash drive into the USB port in the
front panel above the control panel. Press
the Load Menu button on the Preset menu
display.
When the display appears there may be
more than one menu. Press the bar for the
menu you want loaded and a "Loading
Menu..." box will appear with a progress
bar.
When the menu is loaded a box will appear
saying "Menu Loaded". Press the OK but-
ton and the Preset display will appear.
Remove the flash drive from the USB port.

SHORTENING MANAGEMENT:

Pressing this option opens the Shortening
Management Display.
X
Shortening Settings
Shortening Type Selected
Shortening Changed Today
Shortening Last Changed:
Unknown
Pressing the button next to Shorting Type
toggles between "Liquid" and "Solid".
Selecting "SOLID" activates a melt cycle
when the controller is turned on and the oil
temperature is below 100° F.
Pressing the "Shortening Changed Today"
bar enters today's date and time as a
reminder when the oil was last changed.
this also resets the "Cycles Since Last Fil-
terd" counter to 00 on the Cook Tab.
Liquid
OK
broaster.com Manual #17269 8/13 Rev 5/14

LANGUAGE SELECTION:

Pressing this option will allow you to
change the language used in all displays.
(This option is not yet active)

ALERT SETTINGS:

Pressing this option allows you to set con-
ditions for several features.
X
Filter Reminder Cycles
Alert Volume
Keypad Volume
Tone
Stir / Agitate Reminder
The numbers left of the boxes indicate the
current setting. They can be changed by
pressing the "-" or "+" buttons.
Filter Reminder Cycles: This sets the num-
ber of cook cycles between each oil filter
cycle. The Broaster Company recommends
5 cook cycles however, you can set it as
you desire. A setting of "0" will disable the
filter reminder screen.
Alert Volume: This should be set loud
enough to be able to hear it above any
other noises in the kitchen.
Keypad Volume: It should be loud enough
to hear while making changes in front of the
fryer or when operating the fryer.
Tone: There are a range of tones from low
to very high. Chose the one that suits your
operation.
6-9
Alert Settings
-
05
-
05
-
02
-
03
OFF
+
+
+
+
OK