Energy Save Setting; Pin Maintenance - Broaster 1600 Operation Manual

Energy Save Setting:

Pressing this option opens the Energy Sav-
ing Settings display.
X
Energy Saving Settings
Set Energy Save Timer (HH:MM):
Set Auto Shut Off Timer (HH:MM):
(Setting Either Timer to 00:00 will disable the function)
You have two options on this display:
OPTION 1: Energy Saving Option.
The fryer will go into this mode when the
specified idle time has passed. When the
fryer goes into the energy saving mode the
oil temperature will drop to 270° F (132° C)
and remain there until the fryer is prompted
by pressing the green OK button, to resume
the normal cooking temperature. When the
fryer enters the energy saving mode the dis-
play shown below appears.
Energy Save Mode
Set temperature is 270F
Allow temperature to recover
before cooking
When the OK button is pressed the display
returns to the normal Cook Tab display and
the temperature will be yellow and Low and
the set temp will be alternating. DO NOT
start cooking until the temp display is
green.
Option 2: Auto Shut Off Timer.
When this option is set, the control will shut
off all heaters after the specified time, and
the display shown below will appear.
00:00
00:00
OK
Follow the instructions on the screen to
resume use of the fryer.
For either of these options set the desired
time by pressing the time button. A keypad
will appear. Enter the desired time. As you
enter the hours and minutes they will
appear above the keypad. When the time is
entered press the green OK button.

Pin Maintenance:

Pressing this option opens the PIN Mainte-
nance display.
OK
6-6
broaster.com Manual #17269 8/13 Rev 5/14
Heat Off
due to inactivity
Hit "OK" to resume and allow
temperature to recover
before cooking
X
PIN Maintenance
Pin
Pin On/Off
OK
****
OFF
OK