SOLID STATE CONTROLLER TIPS
COMPLAINT
Display reads FAIL
Display reads HI
Display reads PROB
Display reads CHEC
CAUSE
1. There is a controller fail-
ure
1. Oil temperature too high
1. There is a temperature
sensor probe failure
1. Gas valve not ON
(1800GH)
2. Pilot light will not light
(1800GH)
3. Oil temperature not rising
properly
11-2
broaster.com Manual #17269 8/13 Rev 5/14
REMEDY
1. Turn power switch OFF.
Contact service person.
1. Turn power switch OFF.
Contact service person.
1. Turn power switch OFF.
Contact service person.
1. Turn ON
2. Turn ON manual gas shut
off valve
3. Turn power switch OFF.
Contact service person.