TRENDnet User's Guide
SSID: Displays the available SSID
WiFI Security: Displays the wireless security type of the wireless network
No VLAN Tag: Select this option to use no VLAN Tag
Specified VLAN ID: Select this option and enter the assigned VLAN ID.
Traffic Shaping
Management > Traffic Shaping
1. Log into your management page (see
2. Click on the Management tab and click Traffic Shaping.
3. Review the settings and click Apply to save settings.
Enable: Check box to enable traffic shapping of the selected wireless band
Incoming Traffic: Enter your network's inbound traffic limit
Outgoing Traffic Limit: Enter your network's outbound traffic limit
Total percentage: Enter the selected wireless band's traffic percentage to assign
SSID: Enter the SSID's assigned traffic percentage allowed
© Copyright 2015 TRENDnet. All Rights Reserved.
"Access the management
page" on page 16).
Enable SNMP
Management > SNMP Settings
SNMP (Simple Network Management Protocol) is a network management protocol used
to monitor (read) and/or manage (write) multiple network devices on a network. This
preconfigured external SNMP server.
1. Log into your management page (see
2. Click on the Management tab and click Management VLAN.
3. Review the settings and click Apply to save settings.
SNMP: Select enable to enable SNMP feature
Contact: Enter the contact person or contact information for your access point.
Location: Enter an assigned location for your access point.
Community Name (Read only): Enter an assigned name for your access point.
Community (Read/Write): Enter a public and private community name.
Trap Destination Address: Enter the destination IP address of the SNMP trap.
Trap Destination Community Name: Enter the name of the destination community
SNMPv3: Select option to enable or disable SNMPv3
Username: Enter the username
Auth Protocol: Select from the pull down menu the authentication protocol to use
Authentication Key: Enter the authentication key
TEW-821DAP
"Access the management
page" on page 16).
29