Configure Wan Connection Settings For Wisp; Connect To Your Wisp (Wireless Internet Service Provider) - TRENDnet TEW-740APBO User Manual

TRENDnet User's Guide

Configure WAN connection settings for WISP

System > WAN Setup
To setup the WAN interface connection method to the WISP, click on System and click
on WAN Setup. The device supports Dynamic IP, Static IP, PPPoE, and PPTP connection
types. Click Save when you have completed the changes.
Note: Please check with your Wireless Internet Service Provider for the required
connection settings and configure them accordingly.

Static IP – Your WISP requires the IP address, Subnet Mask, Default Gateway, and
DNS Server IP address settings to be manually entered and statically assigned. If
required by your WISP, specify the MAC address for this interface.

Dynamic – Your WISP will automatically provide you the IP address, Subnet Mask,
Default Gateway, and DNS Server IP address settings. . If required by your WISP,
specify the MAC address for this interface.

PPPoE (Point-to-Point Protocol over Ethernet)– Your WISP requires a specifically
assigned user name and password for authentication in order to establish
connectivity.

PPTP (Point-to-Point Tunneling Procotol) - Your WISP requires a specifically
assigned user name and password for authentication in order to establish
connectivity similar to PPPoE but a different type of tunneling technology.

Connect to your WISP (Wireless Internet Service Provider)

Wireless > Station Setup
To connect to your WISP wireless network to establish Internet connectivity, click on
Wireless and click on Station Setup. In the AP Station List, click on Site Survey to scan
for your wireless network.
© Copyright 2017 TRENDnet. All Rights Reserved.
Find your wireless network and click Setup within the entry.
The AP Station Security Settings at the top left of the page will populate with the
information of the selected wireless network. If security is enabled on the wireless
network, enter the WPA/WPA2 PassPhrase or WEP key in the field provided. Scroll to
the bottom of the page and click Save when you have completed your settings and click
Reboot in the top right menu to reboot the device and commit the changes.
TEW-740APBO / TEW-740APBO2K
61