Table of Contents
Advertisement
When remote monitor feature is activated, the audio transmission can be configured in Customer
Programming Software (CPS) to route the audio to the radio internal microphone, wired Remote Speaker
Microphone (RSM), or Bluetooth wireless microphone.
In life-threatening or critical situations, the system administrator can remotely monitor any audible activity
surrounding the targeted radio.
7.4
Contacts
This feature provides address-book capabilities on your radio. Each entry corresponds to an alias (name) and
ID (number) that you use to initiate a call. Contact entries are alphabetically sorted according to the entry
alias.
Each entry, depending on context (conventional, trunking, or phone), associates with one to five IDs
according to the following types of calls:
●
Phone Call
●
Private Call
●
Selective Call
●
Call Alert
Each entry within Contacts contains the following information:
●
Call Alias (Name)
●
Call ID (Number)
●
Call Type (Icon)
●
WACN ID (ASTRO 25 Trunking IDs only)
●
System ID
Your radio must be programmed to allow you to add, edit, or delete the contact entries.
Your radio also supports a maximum of 50 call lists. Each list can store up to 100 IDs.
NOTE: Your radio is programmed with a few contacts per Call Lists. Check with your dealer or system
administrator for more information.
7.4.1
Making a Private Call from Contacts
Prerequisites: Your radio must be preprogrammed to allow you to use this feature.
Procedure:
1.
or to Cnts and press the Menu Select button directly below Cnts.
The entries are alphabetically sorted.
2.
or
to the required subscriber alias.
3. Perform one of the following actions:
●
Press the Menu Select button directly below Optn and proceed to the next step.
●
or to scroll through the available IDs for the selected subscriber alias and proceed to
4.
or
to Call and press the Menu Select button directly below Sel.
5.
or
to select the call type.
MN004478A01-AN
Chapter 7: Advanced Features
step
6.
59
Advertisement
Table of Contents
