Table of Contents
Advertisement
Your radio also supports a maximum of 50 call lists. Each list can store up to 100 IDs.
NOTE: Your radio is programmed with a few contacts per Call Lists. Check with your dealer or system
administrator for more information.
7.4.1
Making a Private Call from Contacts
Prerequisites: Your radio must be preprogrammed to allow you to use this feature.
Procedure:
1.
or to Cnts and press the Menu Select button directly below Cnts.
The entries are alphabetically sorted.
2.
or
to the required subscriber alias.
3. Press the Menu Select button directly below Optn and proceed to the next step.
4.
or
to Call and press the Menu Select button directly below Sel.
5.
or
to select the call type.
6. Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
7. Press the PTT button to initiate the call.
During the call, the display shows the subscriber alias.
8. Press and hold the PTT button to talk. Release the PTT button to listen.
The LED lights up solid red when the PTT button is pressed.
Result:
If there is no voice activity for a preprogrammed period, the call ends.
If the call reaches the maximum ring time, the call ends.
7.4.2
Adding a Contact to a Call List
Procedure:
1.
or to Cnts and press the Menu Select button directly below Cnts .
The entries are alphabetically sorted.
2.
or
to the entry you want to add and press the Menu Select button directly below Optn .
3.
or
to Add to CallLst and press the Menu Select button directly below Sel .
4. Perform one of the following actions:
●
or
to the required Call List and press the Menu Select button directly below Add to add to
the Call List.
●
or
to Cncl to cancel and return to the main screen of Contacts.
The display shows Please wait momentarily before showing <Entry> added to Call List,
confirming the addition of the contact to the list.
Result: The radio returns to the main display of Contacts.
MN004476A01-AN
Chapter 7: Advanced Features
57
Advertisement
Table of Contents
