Clearing All Bluetooth Devices Information; Editing The Bluetooth Friendly Name - Motorola APX E5 User Manual

MN006147A01-AE
Chapter 6: Advanced Features
6.24.10

Clearing All Bluetooth Devices Information

When and where to use:Do one of the following to clear all Bluetooth devices information. You can
use the options interchangeably depending on your preference and the programmed functions.
Procedure:
• Clearing all Bluetooth devices information using the preprogrammed Bluetooth On/Off button:
a. Long press the preprogrammed Bluetooth On/Off button.
You hear a short, medium-pitched tone. The display shows Please wait to indicate
clearing is in progress.
If successful, the display shows All BT devices cleared.
If unsuccessful, the radio sounds a short, low-pitched tone. The display shows Clear all
BT devices failed. The display returns to Bluetooth feature screen.
• Clearing all Bluetooth devices information using the radio menu Clr:
a. or to Devices and press the Menu Select button directly below Clr.
You hear a short, medium-pitched tone. The display shows Clear all BT devices?.
b. Press the Menu Select button directly below Yes to proceed.
The display shows Please wait to indicate clearing is in progress.
If successful, the display shows All BT devices cleared.
If unsuccessful, you hear the radio sounds a short, low-pitched tone. The display shows
Clear all BT devices failed. The display returns to Bluetooth feature screen.
For Bluetooth devices, the display shows BT.
For Wireless-Pair devices, the display shows WP.
Postrequisites:
NOTE: If Re-Pair Timer is set to infinite and you clear keys on the radio, you must clear keys on
all previously paired devices as well. (Please see your accessories manual for further details.)
6.24.11

Editing the Bluetooth Friendly Name

Prerequisites:Your radio must be preprogrammed to allow you to use this feature.
Procedure:
1 or to BT. Press the Menu Select button directly below BT to access the Bluetooth feature
screen.
2 or to Friendly name and press the Menu Select button directly below Edit.
A blinking cursor appears in the Friendly Name screen.
3 Use the keypad to edit the text.
4 Perform one of the following actions:
110