68012006035-FA
Chapter 14 : Connectivity
14.3.6
Viewing and Clearing the Bluetooth Enabled Device Information
Procedure:
1 Press the BT menu item.
2 Select Devices and press Sel.
3 To view the status of devices that are paired or connected, scroll through the list of <Device
Friendly Name>.
If there are no active Bluetooth devices paired or connected, the display shows No devices.
4 To clear a device from the list, select the required device and press Clr→Yes.
If the device is successfully cleared, the display shows <Device Friendly Name> cleared.
If the device is not successfully deleted, your radio shows the following indications:
•
A tone sounds.
•
The display shows <Device Friendly Name> clear failed and then returns to the previous
screen.
Postrequisites: If the Re-Pair Timer is set to infinite and the radio keys are cleared, clear all
previously linked devices keys too. See your accessories manual for further details.
14.3.7
Clearing All Bluetooth Devices Information
Procedure:
Perform one of the following actions:
•
Press and hold the programmed Bluetooth On/Off button.
•
Select Devices and press Clr→Yes.
If successful, the display shows a positive notification.
If unsuccessful, a tone sounds and the display shows a negative notification.
For Bluetooth devices, the display shows BT.
For Wireless-Pair devices, the display shows WP.
Postrequisites: If the repair timer is set to infinite and the radio keys are cleared, clear all previously
linked devices keys too. See your accessories manual for further details.
14.3.8
Editing the Bluetooth Friendly Name
Prerequisites: Contact your system administrator to program this feature on your radio.
Procedure:
1 Press the BT menu item.
2 Select Friendly name and press Edit.
3 Enter the required Bluetooth Friendly Name.
80